Inertsil ODS-3 HP
– 18 columnsInertsil ODS-3
- Virtually perfect peak shape for most bases and acids
- Predictable selectivity with very low operating pressure making this ideal for fast/LC,UPLCTM, and LC/MS
- Exceptional physical and chemical durability provides long column life
- Vast database of chromatographic applications available to assist in method development
GL Sciences’ Inertsil columns offer everything you need for your critical separations in all phases of drug development, and something less. Inertsil’s uniquely modified silicas and meticulously engineered column hardware allow our columns to operate at significantly lower back pressures than competitive columns, without sacrificing efficiency. Inertsil’s wide pH compatibility and excellent stability atelevatedtemperatures make it the ideal choicefor yourchromatographyneeds,whether youare using a traditional HPLC system or the latestrapidgradient LC/MS system with precise temperature control.
Inertsil is available in a wide range of bonded phases, including ODS-3, ODS-Sprint for reduced retention of non-polar compounds, C8-3, Phenyl-3, ODS-EP containing an embedded polar group for increased retention of polar compounds,CN-3, HILIC, NH2, Diol,and a Polymerically bonded ODS-P phase with unique selectivity for planar compounds, uniquely designed for analysis of 16 priority PAHs in environmentalsamples but has also found to be useful for pharmaceutical analysis of planar compounds.
The Inertsil 3-series represents a major advance in performance over the original Inertsil 2-Series. Inertsil 3-Series phases, including ODS-3, ODS-3V, ODS-SPRINT ODS-P, ODS-EP, C8-3, Ph-3, CN-3, NH2, Diol, and SIL-100Å, are based on a purer, higher surface area silica which is specially manufactured to provide maximum bonded phase coverage. The result is a series of columns which provide excellent peak shapes using simple eluents while operating at low pressure.
Inertsil ODS-3, along with most of the other Inertsil 3-series phases, are available in 3, 5, and 8 micron particle sizes in column configurations ranging from capillary to 50mm ID preparative sizes.
Inertsil phases are known to provide excellent results and long column life at pH levels of 9-10. However, optimum column life may be achieved at a pH between 2 and 7.5.
Select an image to enlarge and zoom.
Brand specifications
Every parameter recorded for every column in this Brand is shown here. A single value applies across the Brand; multiple values show what is recorded across its columns.
| Mode | Reversed-Phase | Endcapped | Yes |
|---|---|---|---|
| Modification | Silica/C18 | Max Pressure | 7750 |
| Pore Size (Å) | 100 | Operating Temperature | 60 |
| Surface Area | 450 | pH stability from | 2.0 |
| Carbon Load, % | 15.0 | pH stability to | 7.5 |
Choose column specifications
Columns in this brand
Use the selectors above to narrow the list by specification, or search here by P/N or any displayed value.
| 5020-14011 | 100 | 2.1 | 3.0 | 100 |
| 5020-14012 | 150 | 2.1 | 3.0 | 100 |
| 5020-14013 | 250 | 2.1 | 3.0 | 100 |
| 5020-14014 | 100 | 3.0 | 3.0 | 100 |
| 5020-14015 | 150 | 3.0 | 3.0 | 100 |
| 5020-14016 | 250 | 3.0 | 3.0 | 100 |
| 5020-14017 | 100 | 4.6 | 3.0 | 100 |
| 5020-14018 | 150 | 4.6 | 3.0 | 100 |
| 5020-14019 | 250 | 4.6 | 3.0 | 100 |
| 5020-14081 | 30 | 2.1 | 3.0 | 100 |
| 5020-14082 | 50 | 2.1 | 3.0 | 100 |
| 5020-14083 | 75 | 2.1 | 3.0 | 100 |
| 5020-14084 | 30 | 3.0 | 3.0 | 100 |
| 5020-14085 | 50 | 3.0 | 3.0 | 100 |
| 5020-14086 | 75 | 3.0 | 3.0 | 100 |
| 5020-14087 | 30 | 4.6 | 3.0 | 100 |
| 5020-14088 | 50 | 4.6 | 3.0 | 100 |
| 5020-14089 | 75 | 4.6 | 3.0 | 100 |