CarboPac PA20
– 2 columns
The CarboPac® PA20 column line has been expanded to include a new 0.4 × 150 mm capillary column. As with all CarboPac PA 20 columns, this new capillary format provides high-resolution separations of mono- and disaccharides with no need for derivatization. The CarboPac PA20, 0.4 × 150 mm format offers the additional advantages of higher mass sensitivity, lower required sample amounts, and significantly lower solvent use.
The CarboPac PA20 is a strong anion-exchange column that provides high-resolution separations of mono- and disaccharides with no need for derivatization. This column provides baseline resolution between the six monosaccharides commonly found in mammalian glycoproteins over a wide range of eluent concentrations. The CarboPac PA20 provides slightly different selectivity from either the CarboPac PA1 or PA10, making it an attractive choice for separating difficult peak pairs.
- The column of choice for high-sensitivity monosaccharide analyses
- Highly efficient separations with good resolution between neighboring peaks
- Fast analysis—less than 10 min
- Optimized resolution of glucosamine/galactose and glucose/mannose peak pairs
- Lower eluent consumption
- Does not require derivatization
The CarboPac PA20 consists of 6.5 µm-diameter nonporous beads covered with a fine latex of functionalized MicroBead resin. This pellicular resin structure permits excellent mass transfer, resulting in high-resolution chromatography and rapid re-equilibration.
Select an image to enlarge and zoom.
Brand specifications
Every parameter recorded for every column in this Brand is shown here. A single value applies across the Brand; multiple values show what is recorded across its columns.
| Mode | Anion-Exchange | Operating Temperature | 60 |
|---|---|---|---|
| Modification | Quaternary ammonium | pH stability from | 0.0 |
| Max Pressure | 3000 | pH stability to | 14.0 |
Choose column specifications
Columns in this brand
Use the selectors above to narrow the list by specification, or search here by P/N or any displayed value.