HYDROCELL RP 10D
– 14 columnsHYDROCELL RP 10D is produced from macroporous PS-DVB beads with particle size 5 µm and 10 µm (d50) respectively. These particles have high pore volume and permeability. Their major advantages are lower back pressure and higher permeability in the operation. These media reduce the fluctuation and drop of back pressure when it was used in the gradient separations.
RP 10D is prepared from 5 µm and 10 µm (d50), 1500 Å spherical PS-DVB particles. The media provide optimum pore volume and large pore size with increasing permeability and high separating efficiency for large proteins, polypeptides, oligonucleotides and other macromolecules
Select an image to enlarge and zoom.
Brand specifications
Every parameter recorded for every column in this Brand is shown here. A single value applies across the Brand; multiple values show what is recorded across its columns.
| Mode | Reversed-Phase | Pore Size (Å) | 1500 |
|---|---|---|---|
| Modification | Polystyrene/ Divinylbenzene |
Choose column specifications
Columns in this brand
Use the selectors above to narrow the list by specification, or search here by P/N or any displayed value.
| 12-35RP-D | 50 | 1.0 | 10.0 | 1500 |
| 14-35RP-D | 150 | 1.0 | 10.0 | 1500 |
| 16-35RP-D | 250 | 1.0 | 10.0 | 1500 |
| 22-35RP-D | 50 | 2.1 | 10.0 | 1500 |
| 24-35RP-D | 150 | 2.1 | 10.0 | 1500 |
| 26-35RP-D | 250 | 2.1 | 10.0 | 1500 |
| 34-35RP-D | 150 | 4.6 | 10.0 | 1500 |
| 36-35RP-D | 250 | 4.6 | 10.0 | 1500 |
| 43-35RP-D | 75 | 7.8 | 10.0 | 1500 |
| 46-35RP-D | 250 | 7.8 | 10.0 | 1500 |
| 54-35RP-D | 150 | 10.0 | 10.0 | 1500 |
| 56-35RP-D | 250 | 10.0 | 10.0 | 1500 |
| 66-35RP-S | 250 | 2.1 | 5.0 | 1500 |
| 76-35RP-D | 250 | 50.0 | 10.0 | 1500 |