ProntoSIL 120-5-AMINO H

– 24 columns

Vendor: BISCHOFF

ProntoSIL Amino H

ProntoSIL Amino H is based on an Amino Propyl bonded phase. In comparison to ProntoSIL Amino this support shows a higher hydrophobicity and a different selectivity. It can also be used in three modes: NP-mode, RP-mode and IC-mode (see ProntoSIL Amino). The packing shows a different selectivity in Supercritical Fluid Chromatography (SFC). Due to a special bonding technology it shows a higher lifetime in carbohydrate analysis in the RP-mode. The ProntoSIL Amino H is only available in 120 Å and 5 µm.

Amino Propyl bonded phase
Three modes: NP-mode, RP-mode and IC-mode

1 / 2

Select an image to enlarge and zoom.

Brand specifications

Every parameter recorded for every column in this Brand is shown here. A single value applies across the Brand; multiple values show what is recorded across its columns.

Mode	Normal-Phase/Reversed-Phase/Ion-Exchange	Surface Area	300
Modification	Silica/ Aminopropyl	Carbon Load, %	4.5
Pore Size (Å)	120

Choose column specifications

Length Available: 100 – 300 mm

Internal Diameter Available: 2 – 4.6 mm

Particle Size Recorded value 5 μm

Pore Size Recorded value 120 Å

Columns in this brand

24 columns shown


1002F195PS050	100	2.0	5.0	120
1003F195PS050	100	3.0	5.0	120
1004F195PS050	100	4.6	5.0	120
1046F195PS050	100	4.6	5.0	120
1202F195PS050	125	2.0	5.0	120
1203F195PS050	125	3.0	5.0	120
1204F195PS050	125	4.0	5.0	120
1246F195PS050	125	4.6	5.0	120
1502F195PS050	150	2.0	5.0	120
1503F195PS050	150	3.0	5.0	120
1504F195PS050	150	4.0	5.0	120
1546F195PS050	150	4.6	5.0	120
2002F195PS050	200	2.0	5.0	120
2003F195PS050	200	3.0	5.0	120
2004F195PS050	200	4.0	5.0	120
2046F195PS050	200	4.6	5.0	120
2502F195PS050	250	2.0	5.0	120
2503F195PS050	250	3.0	5.0	120
2504F195PS050	250	4.0	5.0	120
2546F195PS050	250	4.6	5.0	120
3002F195PS050	300	2.0	5.0	120
3003F195PS050	300	3.0	5.0	120
3004F195PS050	300	4.0	5.0	120
3046F195PS050	300	4.6	5.0	120

No columns match these filters. Clear one or more filters to see other options.