ProntoSIL 120-10-CN

– 24 columns

Vendor: BISCHOFF

ProntoSIL CN

ProntoSIL CN is a cyano-propyl bonded phase. It can be used in normal phase mode and reversed phase mode. In RP-mode, the application area of ProntoSIL CN is the separation of strong basic solutes. In NP-mode, the ProntoSIL CN-support offers a complementary selectivity to the other NP-phases Silica, Amino and Diol. Due to the quick equilibration time of the CN-bonded phase it is the best choice for gradient elution in NP-mode. The CN-bonding is available in 120 Å and particle sizes of 3 and 5 µm.

1 / 2

Select an image to enlarge and zoom.

Brand specifications

Every parameter recorded for every column in this Brand is shown here. A single value applies across the Brand; multiple values show what is recorded across its columns.

Mode	Normal-Phase/Reversed-Phase	Surface Area	300
Modification	Silica/CN	Carbon Load, %	5.0
Pore Size (Å)	120

Choose column specifications

Length Available: 100 – 300 mm

Internal Diameter Available: 2 – 4.6 mm

Particle Size Recorded value 10 μm

Pore Size Recorded value 120 Å

Columns in this brand

24 columns shown


1002F200PS100	100	2.0	10.0	120
1003F200PS100	100	3.0	10.0	120
1004F200PS100	100	4.0	10.0	120
1046F200PS100	100	4.6	10.0	120
1202F200PS100	125	2.0	10.0	120
1203F200PS100	125	3.0	10.0	120
1204F200PS100	125	4.0	10.0	120
1246F200PS100	125	4.6	10.0	120
1502F200PS100	150	2.0	10.0	120
1503F200PS100	150	3.0	10.0	120
1504F200PS100	150	4.0	10.0	120
1546F200PS100	150	4.6	10.0	120
2002F200PS100	200	2.0	10.0	120
2003F200PS100	200	3.0	10.0	120
2004F200PS100	200	4.0	10.0	120
2046F200PS100	200	4.6	10.0	120
2502F200PS100	250	2.0	10.0	120
2503F200PS100	250	3.0	10.0	120
2504F200PS100	250	4.0	10.0	120
2546F200PS100	250	4.6	10.0	120
3002F200PS100	300	2.0	10.0	120
3003F200PS100	300	3.0	10.0	120
3004F200PS100	300	4.0	10.0	120
3046F200PS100	300	4.6	10.0	120

No columns match these filters. Clear one or more filters to see other options.